When a remote job needs beds, ablutions and a crib room that actually arrive fit for work, mining camp containers beat a kit that turns up in pieces. At Container Build Group we factory-build sleeping cabins, site offices, kitchens and ablution blocks in South Lismore, NSW, then send them out by train or semi-truck — one piece, ready to place.

If you’re scoping a camp or expanding an existing pad, start here, then dig into the specs on our Remote Mining page.

Concept render of a row of four-bedroom shipping container mining camp modules joined by a covered walkway
Concept render: four-bedroom modules joined by a covered walkway.

What a CBG mining cabin actually is

Our standard shipping-container mining cabin is a 40ft high cube built for mining and remote work. The standard layout:

  • Four separate-access bedrooms — private entry for each room
  • Each room roughly 2.2m × 2.9m, with space for a single bed, work desk and wardrobe
  • Overall about 12.2m long × 2.4m wide (~30 square metres)
  • Fully insulated, with a large aluminium-frame sliding window per bedroom and the door on the opposite side

That’s the same bones as our remote campsite cabin — high-cube 40FT, four private rooms, privacy first. The campsite cabin can also take bunk beds and a sitting bench as options in that layout, and the choice to run one or two bedrooms with the rest as bathroom, kitchen or lounge when you need a different mix.

We custom-make each cabin in our Lismore workshop, so the usual mining finish stays basic and easy to clean — and we can add storage, change finishes or enlarge rooms when the brief asks for it.

Concept render of a mining camp container bedroom with single bed, desk, wardrobe and sliding window
Concept render: one 2.2m x 2.9m bedroom with single bed, desk and wardrobe.

Why container strength matters on a mining pad

On our Mining & Government Infrastructure page we put it plainly: when a remote site needs accommodation, offices or ablutions, you don’t want a building that arrives damaged, in pieces, or non-compliant.

Our containers are engineered to the same standards that survive ocean voyages and stacking. That strength carries to site. Units get there in one piece, undamaged and ready to work — no flat-pack assembly, no cracked panels, no warped frames.

Every unit we build is Australian-made and built to Australian standards, with wiring and fittings done right the first time and a complete service from design through to installation. That matters when the alternative is an imported flat-pack that has to pass inspection after it’s already on the pad.

Camp kit around the sleeping wing

Sleeping cabins are only one slice. From the same Australian workshop we custom-build, in shipping containers and deliver to site:

  • Remote commercial kitchens / camp kitchens
  • Off-grid site offices
  • Recreation rooms
  • Ablution blocks (fully fitted 20ft and 40ft units)
  • Dangerous goods containers and other specialised mining infrastructure units

Need more beds as headcount climbs? The mining cabin is built for that. More sleeping cabins can be delivered when required, staged with the roster instead of overbuilding on day one.

Two kitchens we’ve already built show the range. Our Camp Kitchen at Tumbarumba Caravan Park, installed through Snowy Valleys Council, is two new 40ft high cubes, fully lined and insulated, with 14 cooking stations (each with a sink, hot plate and range hood). It was built in 12 days in the factory and installed in 10 days on site. The Mansfield is our double-width commercial kitchen, built for a site in Port Macquarie: two 20ft high cubes giving about 30 square metres of floor for cooking stations, prep areas and equipment.

Concept render inside a shipping container crib room with tables, bench seats and kitchenette
Concept render: crib room interior with tables, bench seating and kitchenette.
Concept render of a shipping container crib room with shade awning on a mine site
Concept render: a container crib room on a mine site.

Ablutions and site offices come out of the same Lismore factory. Our ablution blocks are fully fitted 20ft and 40ft units, built for easy setup and ready 30 working days from order. Delivery is extra and quoted to your site.

For the site office, our Off Grid Office is a new 20ft high cube, 6m × 2.4m (14.4 m²), with a kitchenette, bathroom and electrical fit-out. It carries its own off-grid kit outside: a high-flow pressure pump, a custom 160L water tank, a 160L sewage holding tank and a macerator pump, with off-grid solar packages available.

Concept render of a CBG 20ft shipping container cabin with sliding door and covered deck on a remote site
Concept render: a 20ft container cabin with sliding door and covered deck.
Concept render inside a 20ft shipping container cabin with kitchenette and bathroom door
Concept render: inside 20ft cabin with kitchenette and bathroom.
Concept render of a shipping container ablution block at a remote mining camp
Concept render: container ablution block for a mining camp.
Concept render inside a shipping container ablution block with toilet cubicles, trough basin and shower
Concept render: ablution block interior with cubicles, trough basin and shower.
Concept render of a 40ft shipping container site office on a mine site
Concept render: a 40ft container site office on a mine site.

Security and power off the grid

Remote pads get vandalism and theft. Beyond standard locks we can fit hinged steel safety screens on windows — open when the room’s in use, locked shut when the crew’s away. Security systems are available if the site brief needs them.

Services are thin out bush. These cabins are designed to run off a small generator, or we can add a built-in plug-and-go RPC off-grid solar unit.

Built in Lismore, trucked or railed to you

Cabins are fabricated in our factory, then moved on train or semi-truck and unloaded with a crane or suitable forklift. A mining cabin can be fitted onsite in a day, and a campsite cabin often takes only a couple of hours.

Our remote mining and campsite cabins are ready 30 working days from order. Larger multi-module camp packages are programmed per project, so share your mobilisation date early — our FAQ covers the rest of the build process.

Concept render aerial view of a remote mining camp built from shipping container modules
Concept render: a remote camp laid out with container modules and covered walkways.

Hard sites we’ve built for

Some of the tough jobs we’ve delivered:

  • Snowy Hydro 32-man Alpine Lodge in the Snowy Mountains
  • Port of Brisbane expansion
  • Middlemount Golf Club rebuild in Queensland
  • Camp Kitchen at Tumbarumba Caravan Park, through Snowy Valleys Council
  • The Mansfield commercial kitchen in Port Macquarie

Different briefs, same idea: Australian factory build, delivered complete, standing up to the conditions it was designed for. Insulation is chosen for the site, because Australia runs from snow to extreme heat, and cyclone ratings are set on the engineer’s drawings for your location.

More commercial examples sit under Commercial and portable buildings.

Talk to the Lismore factory

If you’re comparing mining camp containers, bring location, headcount, spaces needed (sleep / ablutions / kitchen / office / recreation), power strategy and timing. We’ll map that to a practical container brief — sleeping wing first, or a full camp package.

Container Build Group P/L 39 Habib Drive, South Lismore, NSW 2480 Phone: 1300 965 359 · Mobile: 0434 287 636 Email: sales@containerbuildgroup.com.au ABN: 48 141 506 149 Showroom & factory: Mon–Fri 8:30am–4:00pm (appointment necessary)

Start with the product page: Remote Mining · Camp layout twin: Remote Camp Site · Broader range: Mining & Government Infrastructure · Contact